A Step-by-Step Guide to Resetting Your Kwikset Smart Lock

In today’s technologically advanced world, smart home devices have become increasingly popular. Among them, smart locks offer convenience, security, and peace of mind. Kwikset, a renowned manufacturer of door hardware and locks, offers a range of smart locks that combine traditional mechanical strength with modern digital functionality. If you own a Kwikset smart lock and find yourself in a situation where you need to reset it, this article will guide you through the process step-by-step.

Understand the Need for a Reset

There are various reasons why you might need to reset your Kwikset smart lock. It could be due to a forgotten user code, a malfunctioning lock, or if you’re moving into a new home and want to clear all existing codes. Resetting your lock will restore it to its factory default settings, erasing all programmed user codes in the process.

Gather the Required Tools

Before you begin the reset process, make sure you have the necessary tools readily available. Typically, resetting a Kwikset smart lock requires a screwdriver, a paperclip or a similar small tool, and fresh batteries (if needed).

Remove the Battery Cover

Start by locating the battery cover on your Kwikset smart lock. This cover is usually situated on the interior side of the lock, where the battery compartment is located. Use the screwdriver to unscrew and remove the battery cover carefully.

Remove the Battery Pack (if applicable)

If your Kwikset smart lock is powered by batteries, remove the battery pack from the compartment. In some models, the battery pack may be connected with a cable, so gently detach it if necessary.

Locate the Reset Button

Look for the reset button on your Kwikset smart lock. It is typically positioned above or below the batteries or battery pack, and it might be labeled as “Reset” or represented by a small circular indentation. Use the paperclip or small tool to press and hold the reset button firmly.

Reset the Lock

While holding down the reset button, reinsert the battery pack or batteries into their respective compartments. Keep the reset button pressed for approximately 10 seconds or until you notice the lock’s indicator light flashing, indicating that the reset process has begun.

Release the Reset Button

Once the indicator light starts flashing, release the reset button. The lock will continue the reset process, erasing all programmed user codes and restoring the lock to its factory default settings. Wait until the indicator light stops flashing, indicating that the reset is complete.

Reprogram the Smart Lock

After the reset is finished, you can proceed to reprogram your Kwikset smart lock. Follow the manufacturer’s instructions to set up a new master code and any additional user codes you desire. Take note of the new codes and keep them in a safe place.


Resetting your Kwikset smart lock can be a straightforward process when you follow the proper steps. Whether you need to clear existing user codes, troubleshoot a malfunctioning lock, or start fresh in a new home, the reset procedure outlined in this article will guide you through the process. Remember to exercise caution and refer to your specific lock’s user manual for any model-specific instructions. By successfully resetting your Kwikset smart lock, you can ensure the security and convenience of your smart home is all times.

Leave a Comment